Streaming Server

TXVV-VDO2IP

All inputs (SDI or HDMI) up to a maximum of 1080p60.

All functions configurable via web-based configuration page (built-in web server)

Plug and play operation (no computer needed after configuration) with two backlitphysical buttons on the unit

Product details

xVision Streaming Server

Video inputs

  • HDMI 1.4 input
  • 3G-SDI input
  • Input selection with physical button and via web interface

Stream modes

  • RTSP over HTTP/TCP/UDP (RTSP elementary stream)
  • RTMP Publish (For YouTube/Facebook Live, etc)
  • TS over TCP/UDP/HTTP (unicast & multicast)

Video Encoding specifications

  • H.264 (Baseline/Main/High)
  • Configurable bit rate up to 10 Mbps (User selectable between Variable/Constant/Average Bit Rate)
  • Downscaling available from 1920x1080 down to 128x128

Embedded audio support

  • AAC-LC
  • Configurable bit rate range from 32 Kbps to 384 Kbps
  • Sample rate : 48 KHz, 16 bit

Ethernet specifications

  • 1x EtherCON for 100Mpbs IP link
  • DHCP client or static IP

How to connect to the management interface
  1. Download and install the Devicefinder_Release V2.7.exe software below.
  2. Connect your Streaming Server to a DHCP-enabled network.
  3. Run the Theatrixx DeviceFinder application on a computer connected to the same network.
  4. Select the proper network interface and click "Scan". The discovered devices should appear. 
  5. Click "Identify" to make the indicators on the device blink briefly (if required).
  6. Click "Browse" to open the management interface and configure the device.
NOTE: The device can be reset to a static IP of 192.168.1.60 by holding both "Broadcast" and "Source Select" buttons for 10 seconds.

Get latest firmware here: http://www.theatrixx.com/en/converter-update/